Jsueng TPMS Sensor Ford, 4 Pack Tire Pressure Monitoring System Sensor TPMS fit for Ford F150 F250 Flex Fusion Mustang Lincoln MKX MKZ MKS MKT Replaces F2GZ1A189A FR3Z1A189A GL3T1A180GB 315Mhz

【Perfect Replacement】: The tire pressure monitor system (TPMS) is 100% new, perfect match for the Lincoln vehicle, and has been programmed. Replacing OE part number: F2GZ-1A189-A, FR3Z-1A189-A, GL3T-1A180GB, HC3Z-1A189-A, JX7T-1A180-A, ML3T-1A180-AA. 【Fitment/Compatibility】: The TPMS sensor fits for 2018-2022 Ford EcoSport, 2015-2023 Ford Edge, 2020-2022 Ford Escape, 2020 Ford E-Series, 2016-2019 Ford Explorer, 2020 Ford Fiesta, 2015-2016 Ford F-Series, 2021-2023 Ford Mach E, 2022-2023 Ford Maverick, 2015-2023 Ford Mustang ect(Detailed Application Below). 【Long Life】:The tire pressure sensor has a high-performance Freescale Cr2032 battery and 900kpa chip. The battery is made to last up to 5-8 years of normal usage and can work on -40°c— +125°c. 【Professional Test】: All tire pressure sensors need to undergo strict quality control before leaving the factory, including durability tests, high and low temperature tests, environmental tests, motor performance tests, mechanical property tests, performance & noise tests, strength tests, etc. Guarantee each product is 100% all-round quality inspected, and strictly monitoring the defective products. 【1-Year Warranty】: All Jsueng tire pressure monitoring system sensors meet international standards, and have established a technical research and development department with extensive experience to better serve the markets. 【OBDII Relearn】: 1.OBDII connector is required. 2.Confirm TPMS sensors are properly installed. 3.Adjust tire pressures to placard value. 4.Activate TPMS tool on left front tire sidewall next to the valve stem. 5.Repeat for Rf/RR/LR tires. 6.Apply OBD connector to DLC. 7.Tern ignition to ON. 8.Press OK on TPMS Tool to transfer date to ECU. 9.Disconnect OBD connector from DLC. 10.Turn ignition to OFF then start the engine. 11.Drive for at least 5 minutes at 28 mph