Jsueng TPMS Sensor 4Pack Tire Pressure Monitoring System Sensors for Jeep Cherokee Dodge RAM 1500 2500 3500 4500 Replaces 68249197AA 68157568AA 433mhz

Perfect Replacement The tire pressure monitor system TPMS is 100 new and has been programmedReplacing part numbers 68249197AA 68249200AA 68249201AA 68377546AB 68377549AB 68324960AA 68378369AB 68455824AB FitmentCompatibility The TPMS sensor fits for 20132023 Dodge Ram 1500 20142023 Dodge Ram 2500 20142018 Dodge Ram 3500 20182019 Dodge Ram 4000 20142018 Dodge Ram 45005500 20132024 Jeep Cherokee 20182022 Jeep Grand CommanderDetailed Application Below Long LifeThe tire pressure sensor has a highperformance Freescale Cr2032 battery and 900kpa chip The battery is made to last up to 58 years of normal usage and can work on 40c 125c Professional Test All tire pressure sensors need to undergo strict quality control before leaving the factory including durability tests high and low temperature tests environmental tests motor performance tests mechanical property tests performance noise tests strength tests etc Guarantee each product is 100 allround quality inspected and strictly monitoring the defective products 1Year Warranty All Jsueng tire pressure monitoring system sensors meet international standards and have established a technical research and development department with extensive experience to better serve the markets OBDII Relearn 1OBDII connector is required 2Confirm TPMS sensors are properly installed 3Adjust tire pressures to placard value 4Activate TPMS tool on left front tire sidewall next to the valve stem 5Repeat for RfRRLR tires 6Apply OBD connector to DLC 7Tern ignition to ON 8Press OK on TPMS Tool to transfer date to ECU 9Disconnect OBD connector from DLC 10Turn ignition to OFF then start the engine 11Drive for at least 5 minutes at 28 mph