YHTAUTO 5x4.5 Inch Hub Centric Wheel Spacers 20mm Fits Ford, Hyundai, Kia, Mazda, Jeep, Mitsubishi, Dodge & Lincoln Models 5x114.3mm 5 Lug Tire Spacers M12x1.5 Studs, 67.1mm Hub Bore 4PCS

Custom Fit 5 Lug Wheel Spacers: The spacers for car---compatible with Ford, Hyundai, Kia, Mazda, Jeep, Mitsubishi, Dodge & Lincoln Models: 2001-2012 Escape|2006-2012 Fusion|fits 2007-2022 Elantra|2010-2022 Soul|2006-2020 Optima (For 2006 fits MG bodycode)|2009/2011-2024 Sorento|2001-2023 Santa Fe|2013-2024 CX-5|2004-2022 3|2010-2022 Forte|2007-2016 Compass|fits 2007-2022 Sportage|2003-2022 Outlander|2005-2024 Tucson| and more; For full models refer to the amazon garage tool or our picture. About the Tire Spacers: 5x4.5""(5x114.3mm) vehicle PCD (bolt pattern) must match | 67.1mm hub bore| 20mm thickness, this is also the size at which the wheels will be pushed out | M12x1.5 studs & lug nuts | Recommended Torque：70-80 FT/LBS | 12.9 grade studs, highest grade of bolt strength. Hubcentric Bolt-On Wheel Spacers: Tire Spacers have a lip that fits around your vehicle's hub. Spacers put all the pressure right back onto the hub and are more secure than lug centric spacers and you don't need to buy hub centric rings separately. Safety Tips for Installers: The fear with any spacer is that it will come loose. To prevent this, be sure to not only follow the recommended torque specifications, check regularly for looseness and tighten to the recommended torque, but use high-strength thread locker we are equipped with on the stock studs that the spacer bolts to. What You Will Get: 4pcs 5x4.5""(5x114.3mm) wheel spacers, 2pcs high strength thread-locking, 1pc installation instructions; Once installed, gives the truck the clearance and tougher look you want, and handles much better