Vinyl Wrap Self Adhesive 5D Carbon for Car Van Motorbike Interior and Exterior Tech Bubble Free

INSTALLATION NOTES:1. Measure the width and length of the vehicle you are about to install, leaving extra space when cutting.2. Thoroughly clean the application surface.3. Cut the movie according to the different hardware of the vehicle.4. Use a squeegee and a hot air gun to eliminate air bubbles from the film and ensure there is no gap between the coated surface and the film.REMINDER:1. Do not stick it in rainy weather.2. No waxing within one week after pasting the car sticker.3. Washing is not recommended within 48 hours after pasting.PACKAGES INCLUDES:1 x Roll Car Vinyl Wrap • Size:60cmx150cm(2FTx6.5FT) 5D carbon fiber film sticker. • Advantages: Completely waterproof, High Gloss,stain and UV resistant. • The Film is Marine safe, may be used on interior and exterior parts. Suitable for architectural applications like desks, cabinets etc. • Features: Can be re-lifted, repositioned, and stretched while installing, self-adhesive backing with Air Release Channels (Bubble-Free). • Can be easily applied to any non-porous surface with only a heat gun and squeegee. Liftable, slideable and repositionable air-release adhesive, sticks with pressure alone.