TEENGSE Natural Gas Conversion Kit Regulator with Hose, 1/2" Natural Gas and Liquefied Interchange Pressure Regulator Replacement for 3030 CNG 4.0" & LP 10" for Kitchen-Aid 710-0003 Gas Grill

【TWO MODES】: The 1/2 PSI gas regulator have both propane and natural gas mode. The factory setting of the nature pressure regulator is propane mode, if you need natural gas mode, please open the knob on the cover to convert the screw to natural gas mode, please refer to our picture for details. 【SPECIFICATIONS】:The therad on the Regulator is 1/2"" Male Thread and the end of house is 3/8"" Female Flare. When using LPG regulating valve: LP inlet pressure is 2.74Kpa(11 ""w.c), outlet pressure is 2.45~2.55 kpa(10 ""w.c), gas flow rate is 30L/min; When using natural gas regulating valve: LP inlet pressure is 1.74Kpa(7 ""w.c). Outlet pressure is 0.95~1.05 kpa(4 ""w.c), flow rate is 50L/min. 【FUNCTIONS】: This 102-B model rugulator converts your equipment that uses propane to one that uses natural gas. You can use it to replace the Kitchen Aid Natural Gas Conversion Kit 710-0003.Functions the same as the original part contents. 【OPERATING INSTRUCTIONS】: This product is a pressure maintaining valve and should not be used as a pressure reducing valve‌. The hose is not heat-resistant and must not be used near open flames. It should generally be connected at a location far from the stove where it cannot come into contact with open flames, such as the gas cylinder. 【CONVERSION MODEL】: This natural gas pressure regulator can converts these KitchenAid grill models to NG: 720-0709, 720-0709B, 720-0709C, 720-0733, 720-0733A, 720-0745, 720-0745A, 720-0745B, 720-0787, 720-0787D, 720-0819, 720-0819A, 720-0891B, 720-0826, 720-0891R, 720-0893. 【WARM TIPS】: The natural gas conversion Kit is rated to operate from -32°F to 225°F (0°C to 107°C) Do not install the regulator too close to heating equipment or use it in very cold environments. Heat and cold will change the resistance of the spring inside the regulator. The gas pressure regulator will not shut off the gas flow