SAIZHUO BNC to HDMI Video Converter Box,BNC Adapter with Audio for Security Cameras DVRs Supports 720P/1080P Output

Covert BNC analog signals to HDMI signals.With audio port to input audiable signals. It only work for ANALOG CAMERA. It can't convert cable TV signal, can't convert digital camera or AHD/TVI/CVI camera, ONLY FOR ANALOG CAMERA. Before you purchase it, please check your device is an analog camera.. The video converters is a must-have to keep older devices with new modern PC monitor or LCD. It takes aconnect from CVBS security camera directly to an HDMI TV, or converts old security system DVR output (analogvideo signal) to HDMI(digital video signal) for Flat Screen Monitor.. COMPATIBILITY: This box composites CVBS BNC analog video signal input and 3.5mm aux audio signal input to HDMI output with a 720P/1080P switch. NOTE: 1) It's only for CVBS analog camera, can NOT fit the digital camera or AHD/TVI/CVI camera; 2) The output port is standard HDMI type A; 3) It's NOT an SDI converter, can NOT convert cable TV signal. Don't use it to connect your antenna and cable TV.. SPECIFICATION: The adapter adapts 3D compensation technology: motion optimization, color Optimization and digital noise reduction. Automatically detects input signals in PAL or NTSC format, supports 720P@50/60Hz, 1080P@50/60Hz HDMI output resolution (The resolution can reach up to 1920*1080 on LED LCTV), freely switch between 4:3 and 16:9 modes.. It has an exclusive 3.5mm audio port to input audible signals, which allows you to inject sounds to the CVBS cameras video signals. 2) The low-power-consumption digital chip enables the adapter to work 24-hour uninterruptedly and stablely with low heat releasing. It's a simplistic way to broadcast live video feed and perfect for real-time video monitor using CVBS protocol.. Wire it as follows, CVBS CCTV camera or DVR with BNC output - coax cable - this adapter - HDMI cable - pc monitor/ Projector/ Computer. Work after easy installation without any special settings, no driver software required. NOTE: if you use a TV set as the monitor, switch the“input or source” button on the TV clicker to the HMID mode.