PEMP E60 Aux Activator Adapter Open The Aux Audio of The Original Car for BMW E60 E61 E63 E64 CCC 2003-2010 (Note The Step 4)

Step 1: Please watch the 2 videos on how to activate and install the 3 wire terminals, paying special attention to the important tips in step 4! Otherwise you can't get the AUX AUDIO menu and sound.. Step 2: Remove the original car's display screen, and connect the wires as shown in the figure; Start the car and place the original car display on the Entertainment interface;Press and hold the button for more than three seconds until the indicator light turns on; release the button to start activation Process.. Step 3: After the activation process is over, check the original car entertainment interface, AUX Audio shows that it has been activated; keep it connected!. Step4: (important )!! After activation, keep connected, wait for 5 seconds, then turn off and lock the car and let it sleep for 15 minutes. Disconnect the negative pole of the car battery for another 1 minute and then connect it back. Then get on the car and check the aux audio was display, if the aux audio also display. It has stored your AUX AUDIO menu.. Step5: You can buy the Bluetooth aux (ASIN:B0BBF973NP) of pemp get the phone's sound via bluetooth. You still can buy PEMP Android Screen with confidence, ASIN:B08N4B323M,B08V8T22KV. You will get the Sound of PEMP android.