NuIth 28-Pin Aftermarket Stereo Installation Wire Harness for 2012-2018 Toyota Camry/RAV4/Corolla/4Runner, Add or Retain Reverse Camera/Microphone/AUX/USB/Vehicle Speed Sensor Function

28 pin stereo wire harness for Toyota allow you to modify or splice into many of the signals such as Vehicle Speed Sensor(VSS) input, Reverse/Backup Camera trigger, Remote(Steering Wheel) audio control switches, Remote Microphone inputs and Aux Audio inputs. 28 pin ""jumper-type"" harness compatible with Toyota: 2013-2018 Avalon, 2012-2018 Camry, 2012-2018 Corolla, 2012-2018 Highlander, 2016-2021 GT-86, 2012-2018 Prius, 2013-2018 Sequoia, 2013-2017 Sienna, 2012-2019 Tacoma, 2013-2018 Venza, 2013-2018 4Runner, And also fits for 2010-2014 Nissan, 2012-2016 Scion, 2012-2022 Subaru, please check compatible models on Picture 3. Jumper-type adapter for Toyota/ Nissan/Subaru: Highlander radio wiring adapter provides access to many OEM signals without damaging OEM wiring, it's equivalent to adding a switch to defeat the NAV motion-lockout, you could use this harness to hookup the reverse wire from your stereo so that it turns on your factory reverse camera, it also allow you to do the parking brake wire and vehicle speed sensor. Easy to Install: Camry wire harness equips with male and female adapter, male plug will connect to the factory harness and the other to the connector on the back of the head-unit or navigation system; 28 pin stereo harness for Subaru can also be cut and used to restore functionality when installed an aftermarket head unit, eliminates the need to cut factory wiring to splice into the existing wires. Note: Corolla stereo harness is about 9.8 inches long with 28-pin connector on both ends; please check whether your head unit plug matches our product plug before placing your order!!! Some vehicles will not have all signals, while most vehicles will have other signals which are not marked here