Mulush 16”W x 21”D x 3‘’H Soft Close Slide Out Wood Drawer Organizer for Kitchen, Finished, (Cabinet Opening>17.5 inches for Bottom Assembly, Opening= 17 inches for Side Assembly)

Cabinet Requirements: When installing at the bottom, ensure that your cabinet has a opening > 17.5 inches, a depth > 21.5 inches, and a height > 3.5 inches. When installing it on the side, make sure the opening is 17 inches, the depth is between 21 and 23 inches, and the height is > 3.5 inches. The wooden part of the drawer comes fully assembled, with pre drilled metal holes. When measuring, be careful not to let the hinges or pipes affect the measurement of the length, width, and height.. DRAWER SIZE: The outer wooden part of drawer width is 16 inches, depth is 21 inches, and the height is 3 inches. When adding the 1-inch width of the slide rails, the total width is 17 inches. The inner width of this drawer is 14.7 inches, the inner depth is 19.7 inches.. MEASUREMENTS: Width: Open your cabinets as narrow as they can get. Measure the narrowest width of the cabinet. Depth: Measure both the left and right sides. Use the smaller measurement. Measure every place where you plan to put a slide out. Please note the impact of the hinge width and the impact of pipes on the depth measurement. For example, if the measured width is 15 inches, but the hinge takes up 1 inch, the actual available width for installation is 14 inches.. SOFT CLOSE: The pull-out cabinet organizer has soft-close slides for a quiet operation. These full-extension drawer slides can support up to 60 lbs, ensuring smooth and silent movement. Crafted from 5/8"" thick knotless solid wood, the pull-out cabinet shelves has a double-layer natural clear coat. The bottom is made from 1/4"" thick plywood. WHATS INCLUDED: Fully installed 1 wooden drawer with 1 full-extension drawer slides that support 60 lbs and a soft-close mechanism, screws, and a user manual. The cabinet drawers are used for kitchen cabinets, storage under sinks, and other applications