iPower 4x7 Reptile Heat Mat Under Tank Terrarium Heater Warmer Heating Pad Digital Thermometer and Hygrometer with Temperature and Humidity Probe for Amphibian Pet and Small Animals

iPower Reptile Heating PAD Size: 4" x 7" The power reptile heating pad is specifically designed to be used on standard glass terrarium for reptiles, amphibian, small animals, or plant terrarium. Compare with other general heat pad in current market, our heat pad is made of a new heating film which inserted in the pad, providing the suitable temp equably in several minutes. It also can be used for thermostat and/or in conjunction with an additional heat source higher temperature species. Features: 1. Size: 4"x7"; 4W; Length of cord: 6fts 2. 120V US voltage and Standard Plug and No adapter needed 3. Easy to clean and convenient to use 4. Provide quick warm and save energy 5. Waterproof and moisture proof designed 6. UL listed for safety 7. Keep reptile tank warm without any harm to your pets 8. At room temperature 68F(20C), the surface temperature of the heat pad is about 83F (28. 3C) Simple Deluxe Digital Thermometer and Hygrometer with Temperature and Humidity Probe Buttons: MAX/MIN: Current / Highest / Lowest Temperatures and Humidity Levels. C/F: Switch from Celsius to Fahrenheit. IN/OUT: Switch from Room Temperature / Probe Temperature. Specs: Not used for Fish Aquariums. Temperature Sensor Accuracy: 1.2 F / 5%RH. Probe (Out) Temperature Range: 14F to 122F (-10C to 50C). Room (In) Temperature Range: 14F to 122F (-10C to 50C). Probe (Out) Humidity Range: 10% to 99% RH. Humidity Sensor Accuracy: 5% RH. Perfect for measuring temperature and humidity in your egg incubator. Minimum and Maximum memory of both temperature and humidity. Power supply and battery: 1.5V AAA (Not Included). Wide use: Monitor both the temperature and humidity of your bedroom, kitchen, greenhouse, grow tent, especially pet reptile terrarium or egg incubator. Minimum and Maximum memory of both temperature and humidity. 3 In 1 mounting: Strong magnet, squeeze to clip on items, tabletop stand for your convenience. WARNING: Risk of Fire. Never mount the iPower Reptile Heat Pad in a manner that would encapsulate heat. (i.e. mounting it on the bottom of a terrarium and then setting the terrarium directly on any type of table or the floor/carpet). Always use the enclosed rubber feet to elevate your terrarium thus allowing the heat to escape. If unsure of bottom mounting, the side mounting of the iPower Reptile Heat Pad is the preferred application.