for MHD for Bootmod3 WiFi Adapter OBD2 Diagnostic Coding for BMW FSeries GISeries Compatible for BimmerCode for ESYS for Ethernet for ISTA D Work with iOS Android Windows

NOTE THE ADAPTER NEEDS TO BE USED WITH OTHER DIAGNOSTIC SOFTWARE THE SOFTWARE DOES NOT INCLUDE The ENET WiFi interface is diagnostic coding flashing Ethernet adapter for BMW Compatible with ESYS BimmerCode Bootmod3 Ethernet ISTA D MHD xDelete THORthe M Flasher BimmerGeeks ProTool ect So you can use a variety of diagnostic software through this adapterTHE ADAPTER NOT WORKS WITH xHP Falashtool Compatible with BMW Mini Fseries Gseries and Iseries At the same time the Wireless ENET WiFi Diagnostic Tuning Adapter work with iPhone Android and Windows Turn your iPhone Android device or Windows PC into a professionalgrade diagnostic scan tool Faster wireless connection The ENET WiFi interface so much faster compared to the Bluetooth adapters Because the Bluetooth devices over DCAN protocol with a speed of 05 Mbps ENET WiFi connects to the vehicle ethernet network through the ZGW Gateway with speeds of about 100 Mbps EASY to USE PLUG PLAY You can hide modules or program single module if you know how to use for BMW for ESYS for BimmerCode for Bootmod3 Ethernet ect Like read and erase fault codes read and reset airbag light faults code ECU functions code new or existing modules ect SATISFACTION Your ENET WiFi is supplied with a 180day money back if you are unsatisfied for any reason along with a 3year repair or replace manufacturer NOTE Any installation problems please feel free to contact us NOTE For iOS connect to WiFi 1 Connect to ENETs WIFI and record the IP address and subnet mask automatically obtained by the current WIFI 2 Change the IP address of the mobile phones WIFI to manual setting and fill in the previously automatically obtained IP address and subnet mask in the manual IP address setting and turn on the cellular network The gateway and DNS do not need to be set