Epindon Hall Effect Stick Module Replacement Compatible with Victrix Pro BFG Wireless Controllers | Both PS5 & Xbox Version | 2-PACK 80G

Hand-made personalized hall effect stick module PACK compatible with Victrix Pro BFG controller, and a T2.0 screwdriver was included.. No Drift Hall Effect Sensor Sticks:Revolutionary electromagnetic stick module solves the drifting problem, and increasing the precision and durability.. Improve module issues such as drift by replacing existing module.. Easily installation. Unscrew the screws of faceplate and stick module PCB board with attached T2.0 driver; Replace the stock module with Epindon customized hall effect electromagnetic module.【Attention : 】please insert and remove connector pins of left stick module slowly.. Calibration is required after installation. Calibration method: Press the L( R )stick and function button at the same time, the function button LED will flash. At that time, turn the L(/ R) stick left (counterclockwise) and right (clockwise) 3 times each. Then press the function button again, the white LED will turns off to complete the module Calibration.. 【Note】: Always place the VICTRIX PRO BFG controller on a flat, level surface when performing reset/calibration. Multiple reset attempts may be required.