ECCPP 2PCS 1" 5 Lug Hubcentric Wheel Spacers 5x4.5 to 5x4.5 5x114.3mm Fits for 2016-2022 for Nissan Rogue | 2021-2021 for Nissan Rogue Sport |2007-2022 for Nissan Sentra

【FITMENTS INCLUDE】The hubcentric Wheel Spacers 5x4.5 compatible with 1995-2008 for Maxima || 2002-2012 for Altima. 【SPECIFICATIONS】5x4.5 Wheel Spacers HUB CENTRIC with Thickenss:1"" or 25mm;Inner Diameter:66.2mm;Vehicle Bolt Pattern:5x4.5 or 5x114.3mm;Wheel Bolt Pattern:5x4.5 or 5x114.3mm;Thread Pinch:12x1.25;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces). 【PERFORMANCE ENHANCEMENT‌】5X114.3 WHEEL SPACERS 1 inch provide your car with an aggressive appearance while adding safety and stability to your car. It can effectively increase the wheelbase of the car, balance the center of gravity of the body, reduce body deformation, and solve the problems of drifting and tilting when the car is driving at high speeds and cornering at high speeds. 【PERFORMANCE ENHANCEMENT‌】These 1 inch WHEEL SPACERS 5 LUG make your vehicle have a more aggressive stance by giving it a slightly wider stance. And you can enjoy off-roading! Because tire spacers give your car better grip, more acceleration and better handling. And through mounting tire spacers give you more flexibility, because they allow for large brake caliper installations or lift/lowering kits. 【GARAGE CHECKING】5x4.5 to 5X4.5 SPACERS ,Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 12x1.25mm threads; 2) You have more than 1 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 66.2mm,advise torque specs at 70-80 Ft/Lbs. 【INSTALLATION NOTES】The use of a thread lock adhesive is encourage for installing.The back of the wheel must sit flush on the wheel spacers/adapter.The studs on the vehicle cannot stick past the face of the the wheel spacers/adapter. If they do,you may need to modify by grinding/trimming