Dynacraft Heavy Duty Golf Club Lie Fitting Board, Textured Surface Training Aid for Indoor/Outdoor Use (No Impact Tape Required)

Professional Lie Angle Determination: The Dynacraft Heavy Duty Lie Fitting Board is used to determine the proper lie angle of an iron or wedge by hitting golf balls from the surface. No Impact Tape Required: The special textured material leaves a black mark on the sole that can easily be removed from the golf club's sole. Will not scratch the bottom of your club. Golf impact tape for the sole is not required. Ambidextrous Design: Can be used by right- or left-handed golfers. For RH golfers, position the lie board so the word ""TARGET"" is positioned to the left and for LH golfers reverse it so ""TARGET"" is pointed to the right when standing in front of it. Stable Ball Positioning: The pre-drilled hole prevents the golf ball from rolling on the lie board. Make sure to lay the lie board on a hard surface like a golf driving range mat and not a soft surface such as grass to prevent breakage. Easy-to-Read Fitting Results: If the black mark on the bottom of the club's sole is toward the toe, it's too flat. If it's toward the heel, the lie is too upright. If it's in the middle of the sole, you have the proper lie angle. Durable Construction: Heavy duty design measuring approximately 8 inches wide by 16 inches long by 5mm thick, built to withstand repeated use on hard surfaces like golf mats for indoor and outdoor training sessions