DAYBETTER Under Cabinet Lighting, 20ft Dimmable Under Cabinet Lights with Remote, 360 LEDs, Tunable White(2700K-6500K) 6 PCS 3.28ft LED Strip Lights kit for Kitchen, Cabinet, Counter, Shelf, Timer

[Adjustable Color Temperature] Bulit with 6 color modes(2700K-6500K) and 10 brightness levels, this LED under cabinet lights are suitable for every moment of your day, no matter work on the day or relax at night, you can adjust the light for warm temperature, natural white, cold white (2700K/3200K/4000K/5000K/5500K/6500K). [DIY Design] 6 PCS 39.93 inches led strip lights, total 20ft, 8 pcs connectors available offer many kinds of connection options, connectors are designed to bend and fold around corners, also can combine to cross different gaps. [Convenient Dual Controls] 17-Key RF remote control and touch control help you easily switch the brightness and customize the light color as needed, this under cabinet lighting is designed to be easy for use. [Multifunctional] The led light strip can be set to turn off after 60 seconds, very convenience to use as kitchen lights, cabinet lights, shelf lights, display lights, kitchen decor, etc. And has a power-on memory function, which can keep your last lighting mode and help you remember the light color and brightness. [Ultra Easy to Install] It only takes you about 5 minutes to install the under counter lights, just peel off the paper and stick it on, make sure you clean the area of grease/dirt/etc first. Notes: When the controller is not paired with an RF remote controller, it can be controlled by multiple RF remote controllers; when paired, the controller is only controlled by the paired remote controller; one remote controller can be paired with multiple controllers. Remote Pairing operation method: (1) Pairing: When the controller is not bound to a remote control, turn on the lights, press and hold the ON button on any remote control for 2 seconds, and the white light will flash twice to indicate successful pairing. (2) Unpairing: Turn on the lights, press and hold the OFF button on the bound remote control, or power on and off 3 times in succession to unpair, and the device will begin to flash white light continuously