CHOIMOON 3/8 Transmission Cooler Hose 10mm Fuel Injection Hose Push On Lock Hydraulic Line Suitable for Fuel Systems, E85, E10, Coolants, Oil, Air, Methanol, and Lubricant 20FT

⭐ID: 3/8"" (10mm); OD: 3/4"" (16mm). Length: 20 FT. ⭐Working Pressure: 300 PSI. Burst Pressure: 1200 PSI. Temperature Range: -40°F to 302°F.. ⭐PREMIUM MATERIAL◀The 3/8 fuel injection hose is made with high-quality Nylon, thus preventing it from rusting and corrosion. The 3/8 fuel hose also has a wall thickness of 3mm.. ⭐BETTER TRANSIMMISION◀This 3/8 fuel line hose ensures that the car engine is able to process the fuel in the best possible state. The 3/8 transmission cooler hose comes as a roll of 20 feet long enough for a wide range of applications.. ⭐QUALITY TESTED ◀The tube is double annealed making it easy for bending and flaring. You can cut the tubing according to actual needs to better meet your needs. Oil resistant, temperature-resistant, and ethanol tolerance. Hold up to -40°F to +302°F, a lot stronger to heat and extreme circumstances.. ⭐BENDABLE ◀The 3/8 fuel line enables you to make sharp bends without kinking, minimum bend radius up to1.89 inch (48mm). The 3/8 fuel injection hose is easy to work with, and you can even bend it with the palm of your hand. You, however, need to bend it slowly and back and forth for perfect curves.. ⭐WIDE APPLICATION ◀ The 3/8 fuel hose is specially designed to meet SAE 30R9 standard and can be compatible with any fuel (including methanol and nitromethane), oil,E85, E10, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide.