BIQU CryoGrip Pro Glacier 257x257mm Panda Build Plate for Bambu-Lab P1S/P1P/P2S/X1C/X1E/A1 3D Printer Double Sided Upgrade Build Plate Removable Surface Platform

Perfect Compatibility: CryoGrip Pro Glacier build plate is suitable for Bambu-Lab P1S, P1P, P2S, X1C, X1E, A1 3d printers. It is compatible with PLA(45-55℃), PETG(60-75℃), ABS, PA and other filament. Please NOTE the Glacier printing adhesion not as good as Frostbite with PLA and PETG, and if you are using P2S, please close the build plate printing detection. Hollow Out Handle Design: The CryoGrip Pro Glacier Build plate only heats up slightly in the hot bed at 100℃, protecting your hands. After printing is completed, the build plate can be immediately removed and replaced with a new one to continue printing, without waiting for the build plate to cool down before taking it out. Unparalleled Adhesion: CryoGrip Pro Glacier Build plate has unparalleled first layer adhesion. The substrate has high magnetism, strong adsorption and fixation, and limits stress warping, so there is no need to worry about printing failure caused by the first layer falling off, greatly improving the printing success rate. Enjoy perfect printing effect without warping. Special Material Texture Printing: CryoGrip Pro Glacier Build plate sandwiched with 7 layers of cobalt oxide coating, consisting of Base Plate, Base Coat, Intermediate Coating, and Top Coat. The build plate have Impact resistant, Corrosion Resistant, Long life span, zero risk of repeated bending causing coating to peel off. The surface texture is delicate, making the bottom of the printed part smoother. Own AR Code: The intricate markings compatible with X1 buildplate locating scan, help verify buildplate type. No need to worry about missing QR code error. Aslo you can choose your own AR code, no worry error codes when printing High-Temp material with CoolPlate code