AudioControl EPIC4000 Competition-Grade Monoblock Amplifier Car Audio 4000W RMS, Class D Subwoofer Amplifier with Low Pass & Subsonic Filter, Bass Equalizer, Includes Bass Knob for Amp, Epicenter Link

𝗖𝗼𝗺𝗽𝗲𝘁𝗶𝘁𝗶𝗼𝗻-𝗚𝗿𝗮𝗱𝗲 𝗠𝗼𝗻𝗼 𝗔𝗺𝗽𝗹𝗶𝗳𝗶𝗲𝗿: This digital Class D amp is equipped with a compact chassis and line-level inputs for use with most vehicles with aftermarket head units (6.1” W x 21” L x 2.04” H).. 𝗥𝗼𝗯𝘂𝘀𝘁 𝟰𝟬𝟬𝟬𝗪 𝗥𝗠𝗦 𝗣𝗼𝘄𝗲𝗿 𝗢𝘂𝘁𝗽𝘂𝘁: This 4Ω, 2Ω, or 1Ω stable bass amplifier delivers heart-pounding low end with precise clarity (104.8 dBa signal-to-noise ratio).. 𝗜𝗻𝗰𝗹𝘂𝗱𝗲𝗱 𝗕𝗮𝘀𝘀 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 𝗞𝗻𝗼𝗯: Control the volume of your car subs from the driver’s seat. The ACR-E can be mounted with the included dash bracket or flush mounted directly on the dash, console panel, or other areas for custom installations.. 𝗘𝗣𝗜𝗖 𝗕𝗮𝘀𝘀 𝗕𝗼𝗼𝘀𝘁: Variable 0-12dB bass equalizer enhances your music by amplifying specific frequencies between 30-80 Hz.. 𝗦𝘂𝗯𝘀𝗼𝗻𝗶𝗰 𝗮𝗻𝗱 𝗟𝗼𝘄-𝗣𝗮𝘀𝘀 𝗙𝗶𝗹𝘁𝗲𝗿𝘀: 12dB/octave Linkwitz-Riley crossovers ensure only the correct frequencies reach your car speakers.. 𝗠𝘂𝗹𝘁𝗶𝗽𝗹𝗲 𝗕𝘂𝗶𝗹𝘁-𝗜𝗻 𝗣𝗿𝗼𝘁𝗲𝗰𝘁𝗶𝗼𝗻 𝗠𝗼𝗱𝗲𝘀: Protect against low/high voltage, unexpected short-circuits, or other potential electrical or thermal hazards to keep this 4000w amp in excellent working condition.. 𝗣𝘂𝗿𝗲, 𝗨𝗻𝗶𝗻𝘁𝗲𝗿𝗿𝘂𝗽𝘁𝗲𝗱 𝗣𝗼𝘄𝗲𝗿: Solid wire terminals with hex screws (0GA power, 8GA speaker terminals) provide solid connections for maximum, reliable current flow. Required fuse rating: 400A x 1 or 200A x 2 (sold separately). Fuse MUST be installed within 12"" of its connection to battery.. 𝗕𝘂𝗶𝗹𝘁 𝗳𝗼𝗿 𝗧𝗵𝗲 𝗘𝗣𝗜𝗖𝗘𝗡𝗧𝗘𝗥: Easily connect your car amplifier to AudioControl’s legendary bass restoration processor (sold separately) via The EPICENTER Link port, which provides +12V power, ground, and remote-turn on with built-in fuse protection.. 𝗣𝗮𝗶𝗿 𝘄𝗶𝘁𝗵 𝗘𝗣𝗜𝗖 𝗦𝗽𝗲𝗮𝗸𝗲𝗿𝘀 𝗮𝗻𝗱 𝗦𝘂𝗯𝘄𝗼𝗼𝗳𝗲𝗿𝘀: Unleash groundbreaking volume and crystal-clear audio throughout your entire car sound system.. *𝗜𝗠𝗣𝗢𝗥𝗧𝗔𝗡𝗧 𝗜𝗡𝗦𝗧𝗔𝗟𝗟 𝗥𝗘𝗤𝗨𝗜𝗥𝗘𝗠𝗘𝗡𝗧𝗦: (1) Two 0-gauge power wires and two 0-gauge ground wires are required for this amplifier to function. (2) Each 0-gauge power wire must have a 200-amp fuse installed within 12 inches of its connection to the battery. (3) Use only high-quality 0-gauge OFC (oxygen-free copper) wire for all power and ground connections. (4) Do NOT mount the amplifier to subwoofer enclosures.