2pcs DRL Car Daytime Running Light LED Flexible Strip Auto Headlights White Turn Signal Yellow Brake Flow Lights Waterproof 12v 60cm

Features: Material: Silicone /LED Input Voltage: 12V Suitable: Universal for all the cars Feature:Waterproof,Flowing Turning Working Temperature: -40~50 Celsius Light thickness: 0.3 cm (About 0.12 inch) Light Size: 60 cm Color:White flowing turn to yellow Angel eyes, Headlight Turning Light. Red wire for white light , yellow wire for yellow light , black wire for negative wire. ( When driving ,the light is white,While it is constant flowing yellow when turning ) Installation 1,Stick on outside the headlight 2,Wire Connection： Red Wire: +12V/ACC, always on when driving Black wire: - GND / ground (negative power supply) Yellow wire: connecting to turn signal (+) ​Buy attributes: Only white does not need to connect yellow wire, only red and black two wires Package: 2pcs Car LED Daytime Running Light ​Note: 1.90° bending is prohibited during product installation 2. The pictures are for reference only. The actual product shall prevail. 3.Please allow 0.5-2cm differences due to manual measurement. • ✅【Size】Long=60cm,width=1.7cm,height=0.7cm.Working voltage:DC12V.For cars,SUVs, motorcycles,electric bicycle lights,etc. • ✅【Functions】Ultra-thin soft LED strips built-in or external headlight,used for daytime running lights,it is white; For turn signal light,it is amber/yellow flowing like water;Enhance your vehicle vision and drive safely at night. • ✅【Soft】Highly active absorbent silicone material,software circuit board,making it easier to easy to make any shapes and length to fit into your headlight modification. • ✅【Waterproof】Double-layer silicone body wraps the control circuit and all 3528SMD chips.High-level waterproof buckle seals the two ends of body.LED strip is suitable for any weather,rainy,cloudy,snowy or fog and all road conditions. • ✅【Convenient】Easy installation,LED strip can be directly paste inside or outside of the headlight without disassembling the headlight.Red wire to ACC +,black wire to negative pole (-),yellow wire to signal light wire.It can be DIY:Every 3 LEDs as a team are cut from the end and sealed.